High Temperature and Voltage Resistant Bended Silicone Rubber Connector for Car Ignition
1. Product characteristics:
| Usage temperature | -20℃-155℃ |
| Breakdown voltage (AC) | ≥30KV |
| Insertion and removal forces | 20N-70N |
| Overall length | / |
| Resistance | 1KΩ±20% |
| Lifetime | ≥50,000km / ≥3years |
| Standard | ISO 6856 / ISO 3808 |
| Heat and cold resistance |
| Great dielectric properties |
| Acid and alkali resistance |
| No deformation, no dilatation |
| Good uniformity of dimension |
| Can be customized based on customers |
2. Raw material properties:
| Shore-A hardness | 55±5A |
| Elongation at break | ≥300% |
| Tear strength | ≥15N/mm |
| Dielectric strength | ≥20KV/mm |
| Tensile strength | ≥6N/mm2 |
| Tensile deformation | ≤20% |
| Density | 1.17±0.02 g/cm3 |
| Withstand voltage 18KV for 30minutes | NO breakdown |
| Surface resistance | ≥1011Ω |
| Ageing resistance | 155±2.5℃X168h,Without any cracking |
3. Assembly dimension:
| Cable entry diameter | 5.5±0.5mm |
| Assembly dimension: connecting cable | 
|
| Plug entry diameter | 14.3±0.5mm |
| Assembly dimension: connecting spark plug | 
|
4. Customers for spark plug wire connector:
5. Connector Applications:
- The connector is used in the ignition system of auto engine, see picture below:
Easy to install: Easy to install and remove, no special tools required. Easy to install, plug boots are suitable for most of the engine and electric vehicles.
stainless steel: Made of stainless steel material, durable and easy to use. The boot is made of stainless steel, which has high hardness and corrosion resistance.
brand new: Brand new, fashion design and easy to use.
Silicone: Made of high quality silicone material, which is durable and has a long service life. Silicone boots are durable and can be used for a long time to keep the spark plugs working well.
spark plug wire rubber boots ends: This is a new spark plug wire rubber boots. Spark plug wire rubber boots, better protect your engine.
pls look pictures: These boot plugs are made of stainless steel and rubber, which has good electrical conductivity, wear resistance, durability and long service life.
separate ignition: Can be used for diy ignition coils or split ring sets, convenient and practical. The boot of this section is very convenient for you to replace a separate ignition coil.
for universal: This is the brand of performance ignition products for most motorcycles or atvs. At the same time, these plug boot kit are for universal use, can be applied in most spark plugs of different brands.
open magnetic: These plugs can be used to make various sizes of open magnetic coils, wire planters or other electronic products.
Product Tags:
|
|
90 Degree Bended Spark Plug Wire Connector Auto Ignition Cable Connectors Images
|
